You searched for Bullseye Power Parts

We found 5 item(s) matching your search

Bullseye Power Carbon Fiber Air Intake Pipes

This is a full 3" Carbon Fiber MAS air pipe. It can be used on a 1g, 2g or even a 1g with a 2g MAS. Just visit our silicone hose section to purchase the needed connectors for your application. Reducers are also available to connect this to any of the smaller 16g inlets.
Bullseye Power Carbon Fiber Air Intake Pipes - Details

Bullseye Power Engine Management Piggyback

The PCU-1 is a piggyback system that is added to the existing engine management system. It makes the existing system tunable without have to make chip changes and without touching the ECU. An available shorting strap will quickly revert the vehicle back to its standard operation. The PCU-1 allows any engine to be tuned by modifying signals found wi...
Bullseye Power Engine Management Piggyback - Details

Bullseye Power DSM 400hp Turbos Only

If you would like to replace the factory turbo, this unit is recommended for the stock fuel system and intercooler. This is a Garrett T04B rated at 38 lbs/min and will support 300-350 hp at 15-20 psi. It will bolt to your factory manifold and downpipe with only modifications to their oil feed and drain. Gaskets are included. This unit will also req...
Bullseye Power DSM 400hp Turbos Only - Details

Bullseye Power DSM 450hp Turbos Only

If you would like to upgrade the factory turbo, this unit is recommended for use with upgraded fuel system and intercooler. This is a Garrett T04B rated at 48 lbs/min and will support 400-450 hp at 15-25 psi. It will bolt to your factory manifold and downpipe with only modifications to their oil feed and drain. Gaskets are included. This unit will ...
Bullseye Power DSM 450hp Turbos Only - Details

Bullseye Power DSM 550hp Turbos Only

If you would like to upgrade the factory turbo, this unit is recommended for use with upgraded fuel system, intercooler and camshafts. This is a Garrett T04E rated at 60 lbs/min and will support 500-550 hp at 15-30+ psi. It will bolt to your factory manifold and downpipe with only modifications to their oil feed and drain. Gaskets are included. Thi...
Bullseye Power DSM 550hp Turbos Only - Details