|
|
| Back
You searched for CorkSport Parts
We found 21 item(s) matching your search
|
|
CorkSport Power Series Duct Air Intakes
The Cork Sport 'Power Series' Air Duct replaces the front portion of the fender well liner. The purpose is to bring in fresh/cold air to the chamber where the 'Power Series' and other intake systems locate the filters. This duct gives the intake system a direct source for air which decreases intake temps and increases power. Gives you the full pote...
CorkSport Power Series Duct Air Intakes - Details
|
|
|
|
CorkSport Power Series Downpipes
This down pipe is custom made to make your turbo spool faster, and make more top end power. Cuts down on boost spikes, and will increase boost by about 2psi on the top end. The Exhaust pipe is 60mm. and the waste gate pipe is 1.34in. The flange is for a VJ20 and VJ14 turbo. This is a non A/C down pipe. The end of the down pipe does not have a fl...
CorkSport Power Series Downpipes - Details
|
|
|
|
CorkSport Power Series Mazdaspeed Downpipes
The CorkSport Power Series Exhaust Downpipe increases spool up time optimizing the flow of the exhaust at the exit of the turbocharger. This was gained through smooth transitions in pipe diameter with velocity as the goal.
The CorkSport Power Series Exhaust Downpipe is made from polished 304 stainless steel. The downpipe features mandrel b...
CorkSport Power Series Mazdaspeed Downpipes - Details
|
|
|
|
CorkSport Power Series Exhaust Systems
The 'Power Series' Exhaust System is constructed of mandrel bent T304 polished stainless steel. The Power Series system also weighs 20lbs less than the stock system. 4" tip muffler. Built in resonator creating a quality, non-buzzy sound. *Removing OEM catalysts is not legal for street use.
Upgraded motor mounts are highly recommended when upgrad...
CorkSport Power Series Exhaust Systems - Details
|
|
|
|
CorkSport Power Series 3 Exhaust Systems
The 'Power Series' Exhaust System is constructed of 60mm (2.4") mandrel bent T304 stainless steel with a polished finish. Using this exhaust system eliminates the second cat, but does not cause a check engine light (CEL) to occur. The 'Power Series' system also weighs substantially less than OE. An 86mm resonated tip is used. *Removing OEM catalyst...
CorkSport Power Series 3 Exhaust Systems - Details
|
|
|
|
CorkSport Power Series FC Exhaust Systems
The all new Cork Sport 'Power Series' Cat-back exhaust system is constructed of 80mm (appx. 3 1/8") T304 stainless steal with a polished finish (100mm tip). Mandrel bent for maximum flow design. The single exit (driver side) also helps drop substantial weight from the vehicle (appx. 36lb drop in weight from stock). This system's flange tapers down ...
CorkSport Power Series FC Exhaust Systems - Details
|
|
|
|
|
CorkSport Power Series FD Exhaust Systems
The Cork Sport 'Power Series' Cat-back exhaust system is constructed of 80mm T304 stainless steal with a polished finish (108mm tip). Mandrel bent for maximum flow design.
CorkSport Power Series FD Exhaust Systems - Details
|
|
|
|
CorkSport Power Series Miata Exhaust Systems
High quality T304 Stainless steel construction with a polished finish. Both steel and glass packing make for a long lasting muffler. 50mm pipe, 85mm tip. This is an axle-back system. The Power Series exhaust system demonstrated no average power loss compared to no muffler at all! This exhaust features a deep, agressive tone. This system comes with ...
CorkSport Power Series Miata Exhaust Systems - Details
|
|
|
|
CorkSport Power Series RX8 Exhaust Systems
The Cork Sport 'Power Series' Exhaust is constructed of polished, Mandrel bent, T304 stainless steel. It uses a dual muffler design for improved flow and reduction in weight. The exhaust uncorks a deep tone which gives/leaves a powerful impression. This exhaust weights 24 lbs less than stock.
CorkSport Power Series RX8 Exhaust Systems - Details
|
|
|
|
CorkSport Mazdaspeed Miata Front Mount Intercoolers
The CorkSport Mazdaspeed Miata Front Mount Intercooler Upgrade Kit increases the efficiency of the turbo system by incorporating a larger bar and plate type intercooler. The intercooler fills the bumper opening taking advantage of all the airflow entering the engine bay with increased surface area. The larger intercooler core allows for better he...
CorkSport Mazdaspeed Miata Front Mount Intercoolers - Details
|
|
|
|
CorkSport Power Series Midpipes
The CorkSport Power Series Exhaust Racepipe frees up the exhaust system by removing one of the catalytic converter(s) from the exhaust system for an extra performance boost for track days and racing. The racepipe fits with the other CorkSport Power Series exhaust products or it can be used with the stock exhaust and downpipe.
The CorkSport P...
CorkSport Power Series Midpipes - Details
|
|
|
|
|
CorkSport Rear Urethane insert Motor Mounts
CorkSport, your Mazda performance specialists, introduce the CorkSport Mazda 3 Urethane Lower Motor Mount Insert for the Mazda 3.
The CorkSport Mazda 3 Urethane Lower Motor Mount Insert limits the movement of the stock soft motor mount. This provides a direct feel of the engine by limiting the excessive engine movement under acceleration without ...
CorkSport Rear Urethane insert Motor Mounts - Details
|
|
|
|
|
CorkSport Radiator Shrouds
CorkSport, your Mazda performance specialists, introduce the CorkSport Mazda Miata Radiator shroud for the 89-97 Mazda Miata.
The CorkSport Mazda Miata Radiator Panel improves the appearance of the engine bay. The CorkSport Mazda Miata Radiator shroud can be painted to match your Miata or installed as it arrives, gloss black.
The CorkSport Ma...
CorkSport Radiator Shrouds - Details
|
|
|
|
CorkSport Shifter Parts
Replaces plastic lower shifter and/or shift linkage bushings. The bushings are machined from a special alloy (Bronzoil) containing oil molecules for self-lubrification (oil is released as bushing wears). Machined to much closer tolerances than the original ones, these bushings will provide more positive shifts and will eliminate sluggishness at the...
CorkSport Shifter Parts - Details
|
|
|
|
|
CorkSport Bushings Shifter Parts
CorkSport, your Mazda performance specialists, introduce the CorkSport Shifter Bushing for the 1999-2003.5 Protege.
The CorkSport Shifter Bushing replaces the original rubber shifter bushing with an improved urethane bushing which removes excessive movement. You ll feel the improvement from the CorkSport Shifter Bushing every time you shift.
...
CorkSport Bushings Shifter Parts - Details
|
|
|
|
CorkSport Front Strut Tower Bars
A great addition to your car. Strut bars help increase the stiffness of your chassis, which results in improved handling and steering response. This strut bar offers improved quality and functionality over our previous strut bar. This bar compares to the Mazdaspeed and Cusco strut tower bars but at around 1/2 the cost.
CorkSport Front Strut Tower Bars - Details
|
|
|
|
CorkSport Rear Strut Tower Bars
CorkSport offers a great addition to your car, The CorkSport rear Strut bars help increase the stiffness of your chassis, which results in improved handling and steering response. This rear strut bar offers improved quality and functionality over our previous strut bar. This rear CorkSport strut bar compares to the Mazdaspeed and Cusco strut tower ...
CorkSport Rear Strut Tower Bars - Details
|
|
| |
|
|
|
|
|
Shopping Cart (0 items - $0.00)